Actuator valves

Motorized valve  are usually connected by electric actuators and valves, and become electric valves after installation and commissioning. The electric valve uses electric energy as the power to connect the electric actuator to drive the valve, so as to realize the switch and regulating action of the valve. So as to achieve the purpose of switching or regulating the piping medium.

Electric valve actuation is usually done by motor, open or close action. It needs a certain amount of time to simulate, and can be adjusted. Comparison of voltage resistance. Solenoid valve is fast open and fast closing, generally used in small flow and small pressure, requiring large switching frequency; electric valve vice versa. The opening of the electric valve can be controlled, the state is open, close and half open, and the flow rate of the medium in the pipe can be controlled, and the solenoid valve can not meet this requirement.

The three wire electric valve has F/R/N three lines, F represents the forward movement (or open action) control line, R represents the reverse action (or close action) control line, N represents the ground line. The solenoid valve is a kind of electric valve; it uses the magnetic field produced by the electromagnetic coil to pull the valve core, so as to change the valve body's break, the coil is cut off, and the valve core is refunded by the pressure of the spring.

The Size DN15 DN20 DN25 DN32 DN40 DN50 DN65 DN80 DN100 to DN200.